RackLink have a growing range of 19" Rack Mount Circuit Breaker Distribution Boards suitable for hard-wired distribution.
These units allow for sub-board type distribution to be installed inside a 19" Rack Enclosure, saving the cost and frustration of finding space for a wall-mount distribution board.
This means that your distribution board can be co-located with the equipment in the Rack, making identification of circuits and problem solving easy.
Our 3U Rack Enclosure Distribution Panel has a full length DIN rail, and either a 12-pole half-width window, or a 24-pole full-width window.
The extraordinary versatility of these panels means that they can also be used for a variety of DIN-mount applications.
Contact us if you have specific site requirements, as we may be able to build a custom solution for you.
|DBB312E||Distribution Board: 3RU - 12pole, with earth stud, Black Ripple||3RU||12pole||Black|
|DBG312E||Distribution Board: 3RU - 12pole, with earth stud, Grey||3RU||12pole||Grey|
|DBR312E||Distribution Board: 3RU - 12pole, with earth stud, Red||3RU||12pole||Red|
|DBB324E||Distribution Board: 3RU - 24pole, with earth stud, Black Ripple||3RU||24pole||Black|
|DBG324E||Distribution Board: 3RU - 24pole, with earth stud, Grey||3RU||24pole||Grey|
|DBR324E||Distribution Board: 3RU - 24pole, with earth stud, Red||3RU||24pole||Red|
|DBB424E||Distribution Board: 4RU - 24pole, with earth stud, Black Ripple||4RU||24pole||Black|
|DBG424E||Distribution Board: 4RU - 24pole, with earth stud, Grey||4RU||24pole||Grey|
Please note: These are bare units only, supplied with din rail fitted, and a kit made up of pole fillers, cable protection grommets, and mounting hardware.
Circuit Breakers & Brass/comb Busbars and insulated Comb Busbar connectors are an optional extra.
All units include a rear cable management area.